MCSE10RA

Артикул 114813740

MCSE10RA

Артикул 114813740

AIR NUTRUNNER MOTOR WITH AUTOMATIC SHUT OFF

Air nutrunner motors specifically designed and manufactured by Fiam for industrial automation, they are used in single or multi-spindle, manual or fixtured tightening units.

Thanks to the automatic and immediate air shut-off device, these motors guarantee high torque repeatability also in the presence of variability of the joint softness level. This system maintains same torque
values for hundreds of thousands of cycles.

They guarantee reliable operation in every working condition, also at low air feed pressure, both in vertical and in horizontal axis in respect to components to be tightened.


FEATURES

  • Reversible and Non-Reversible models
  • Compact design, reduced sizes and weights for easy insertion into the machine
  • Equipped with ported signal, to interface with line PLC: this pneumatic signal, interfaced with PLC of machine management, can supply end cycle signals, torque achivement and start the up/down movement of the supporting frames and other cycle sequences
  • On request: axial compensators, models with axial compensation already incorporated, low speed or customized in the design, with quick change chuck, with special clutch for left tightening control, with off-set devices
  • They can be equipped with built-in torque transducer: besides verifying whether the clutch correctly works, it reads the torque the nutrunner delivered and allows data collection; as a consequence the tightening cycle is checked and possible errors identified (partially tightened screws, already tightened screws, crossed thread, etc.).

2 STARTING SYSTEMS

  • PUSH TO START

    Is a simple and economical system for only right-hand rotation motors.

    The motor starts automatically when a push of about 2 or 3 Kg is applied directly to it.

    This is the recommended system for starting motors installed on automatic fastening slides.

     

     

  • DIRECT START FROM A REMOTE CONTROL SIGNAL

    Is achieved by the application of:

    • a 3-way pneumatic control valve (on right hand rotation motors)
    • a 5-way control valve (on reversible motors)

    Direct start is recommended for multispindle assembly systems where the operator’s effort has to be reduced.


APPLICATIONS

To tighten any threaded element, in single or multi-spindle assembly units to assemble multiple elements at the same time.

They can be inserted into automated assembly lines, in rotary table machines, on fastening slides, on electronic axes to assemble on different planes or on versatile and always reconvertible anthropomorphic robots.

Технические данные

PDF
Модель
MCSE10RA
Артикул
114813740
Крутящий момент (Lb)
22.1÷88.5
Крутящий момент (Nm)
2.5÷10
Скорость холостого хода (rpm)
500
Вес (Lb)
2.18
Вес (Kg)
0.99
Вспомогательные аксессуары
FEMALE HEXAGONAL DRIVE 1/4"
Обратный ход
Reversible
Осевой компенсатор
Optional
Подача воздуха
1/4" gas
Потребление воздуха (l/s)
9
Размеры (mm)
L 266 x Ø 36
Тип запуска
Direct start
Тип подачи
Air
Тип трактора
Air
технологии завинчивания
With mechanical clutch and automatic shut off

Dotazione di servizio

  • Руководство по эксплуатации и техническому обслуживанию
  • Imballo riciclabile

Связаться с нами

Вы хотите узнать больше о технологиях закручивания? Хотите ли вы получить предложение или конкретные ответы от наших дистрибьюторов или инженеров Фиам?

Fiam ti offre eccellenti soluzioni su misura.

Я хочу получать эти услуги:

Я хотел бы получать информацию по этим темам:

Пожалуйста, пришлите мне следующие публикации в формате PDF:

Thank you for filling the form. The requested information has been sent correctly and you will be contacted as soon as possible.

Please double check the fields