E8MC5A-350
Артикул 111712704
E8MC5A-350
Артикул 111712704
ELECTRIC NUTRUNNER MOTOR WITH MECHANICAL CLUTCH AND AUTOMATIC SHUT-OFF
Brushless electric nutrunner motor designed and built entirely by Fiam in Italy, it is an efficient, easy-to-use, green electric tool with a high level of performance and reliability, versatile and intelligent ideal for the needs of industry 4.0 and programmed to integrate into a smart production organization in every industrial sector. With modular construction for safe maintenance management. Built-in electronics.
Is equipped with a tightening torque control system that automatically shuts off the power supply when the torque is reached, and this done by a latest generation mechanical clutch. This system ensures very high repeatability, which means a very low Mean Shift value even when the elasticity of the joint is variable. It maintains values unchanged over millions of cycles, ensuring a high quality standard that remains constant over time.
Specifically for use in industrial automation because it has:
- strong thrust bearings: they withstand the thrust of the sort of slides found in automated production cycles that move in rapid, non-stop strokes
- ideal external geometries: they make machine mounting practical along the full length of the aluminium outer body
- centring system: designed to achieve unbeatable reliability along both the vertical and horizontal axis.
- guaranteed long-term gear efficiency: careful design, dimensioning and innovative processes ensure that the performance of the reduction unit is almost unchanged even after hundreds and hundreds of operating hours as certified by our laboratories
The nutrunner motors are front‑prepared for mounting the screw suction head , which automates screw pickup and positioning, making operations fast and efficient.
For these Pick & Place systems, the screw suction head and the SSU-E vacuum pump — available and to be ordered separately — work in perfect synchrony with the tightening system.
-
TOOL FUNCTIONALITY WITH TPU-2 POWER SUPPLY UNIT
• LOW-HIGH IDLE SPEED : with TPU-2, the LOW speed is approximately equal to 80% of the max speed indicated in the table and can only be set through the HIGH/LOW speed setting• UNTIGHTENING INHIBITION• SOFT START: from rest to rated speed in 1.5 sec.• I /O 5 + 5:NPUT SIGNALS1. H/L speed2. Motor stop3. Reverse4. Emergency5. StartOUTPUT SIGNALS1. Ready2. Stalled Motor3. Run4. Reverse5. Clutch engaged -
TOOL FUNCTIONALITY WITH TPU-M1 MONITORING UNIT
With TPU-M1, the speed is adjustable and the minimum speed value is equal to 50% of the max speed, as indicated in the table-
- It automatically recognizes the tool connected and configures themselves immediately to its parameters, so operators cannot make initial setup errors
-
- Displays: OK/NOK status, tightening time value and angle value.
-
- Screws counting/end cycle
-
- It detects process anomalies, for example stripped threads or screws already tightened
-
- Store up to 99 tightening operations
-
- It communicates with the outside: the PLC or other devices on the assembly line (such as accessory selectors, positioning jigs, etc.) and can be managed remotely
-
- It solves tightening situations with critical joints, for example with flexible gaskets, or components made of rubber or other materials
- 8 programs to control tightening process
- 1 programmable sequence up to a max of 8 steps
- Retention: programmable waiting interval between programs
- I/O Port (8 inputs/8 outputs) with 21 + 22 signal types
- Serial communication (RS232)
- Language selection (IT, EN, DE, FR, ES, TR)
- 7 LEDs for immediate display of the process status
• IDLE SPEED RANGE: settable within the indicated range• UNTIGHTENING: can be activated/deactivated, settable speed• SOFT START: settable acceleration time• PRE-AUTO UNTIGHTENING: to set the untightening angle and the pause between the untightening and the subsequent tightening• POST-AUTO UNTIGHTENING: the untightening angle is settable as well as the time pause of left rotation start after the tightening end• STOP-BY-TIME TIGHTENING: to tighten in depth and not to define torque• INDUSTRY 4.0: they interconnect with the factory management systemTIGHTENING STRATEGIES
- Torque control with mechanical clutch
- Torque control with mechanical clutch and tightening time monitoring
- Angle control and tightening time monitoring
- Time control (Stop-by-time tightening)
-
FEATURES
- Front Thread to accommodate the screw suction head (head to order separately)
- To be combined with TPU-2 or TPU-M1 control units
- Speed with TPU-2: HIGH/LOW
- Speed with TPU-M1: ADJUSTABLE
- Ø for mounting: 36 mm
- Connecting cable supplied
- ESD certification
- EXTENDED WARRANTY: 2 years or 1 million cycles
- Available motors with off-set device, axial compensator, modified flange and / or with customized body design, angled head
APPLICATIONS
To tighten any threaded element. The nutrunner motors ca be integrate in single or multi-spindle assembly units to assemble multiple elements at the same time. They can be controlled automatically and inserted into automated assembly lines, in rotary table machines, on fastening slides, on electronic axes to assemble on different planes or on versatile and always reconvertible anthropomorphic robots.
DIMENSIONS

Технические данные
PDFDotazione di servizio
- Руководство по эксплуатации и техническому обслуживанию
- Imballo riciclabile





