E8CC2A90-2000

Артикул 111712130

E8CC2A90-2000

Артикул 111712130

ELECTRIC ANGLE NUTRUNNER WITH TORQUE/ANGLE BY CURRENT CONTROL: OFFSET 90°

Brushless electric screwdriver designed and built entirely by Fiam in Italy. It is an efficient, easy-to-use, green electric tool with a high level of performance and reliability, versatile and intelligent ideal for the needs of industry 4.0 and programmed to integrate into a smart production organization in every industrial sector.

The torque is detected by measuring the current used by the motor. The angle is detected through specific hall sensors integrated. This technology offers the possibility of adjusting the torque during operation simply by changing the specific parameter on the combined control unit: TPU-C1 model or advanced TPU-C3 model.

90° HEAD: is extremely compact to reach awkward tightening sites — has been designed and manufactured with innovative materials that make it wear resistant (and hence low maintenance), while delivering impressive tightening precision.

REDUCED-EFFORT START UP: the pressure required to activate lever start up is much lower than others available on the market, only 9 N! Reducing the effort the user needs to sustain over the course of the working day, will result in increase of production efficiency. The reversible button works also for multifunctional programming and it is equipped with signaling leds.

Thanks to ERGONOMIC GRIP can be used by both right- and left-handed operators, and has also been designed to suit female hands.

  • BASIC FUNCTIONALITY OF THE SYSTEM: SCREWDRIVER + TPU-C1 CONTROL UNIT

    • 1 program to control tightening process
    • Automatic tool recognition and immediate configuration
    • Displays the OK / NOK status, in addition to the tightening time
    • Displays the sequence of screws tightened with bright LEDs
    • SCREW COUNTING (Poka Yoke device)
    • TOOL SPEED can be set within the minimum/maximum range
    • Lighting LED: adjustable intensity
    • UNTIGHTENING: can be activated/deactivated, settable speed
    • SOFT START: settable acceleration time
    • Detect process anomalies like overtreading and already tightened screws through the control of the tightening time
    • Store up to 99 tightenings (process statistics)
    • They relate to the PLC or other devices and can be managed remotely
    • «SMART THREAD»: to process self-threading, self-tapping, self-drilling screws, or else where the final torque value is lower than thread forming torque
    • «SMART SPEED»: two-phase strategies with different speed: the first with a high speed tool rotation until reaching the set angle,  the second with a pre-defined speed that allows to maintain the
      accuracy of the result
    • Parameterizable functions to manage several applications
    • 8 + 8 programmable I/O (9 + 11 signal types)
    • Smart Pro programming for end-of-cycle/anomalies/errors management
    • INDUSTRY 4.0: they interconnect with the factory management system

    TIGHTENING STRATEGIES

    • Torque control
    • Torque control with tightening time monitoring
  • ADDITIONAL FUNCTIONS OF THE SYSTEM: SCREWDRIVER + TPU-C3 CONTROL UNIT

    In addition to all the functions described above, the TPU-C3 model offers:

    • Min / Max tightening angle control — Poka Yoke system
    • Displays the ANGLE value at the end of each cycle together with
      TIGHTENING TIME time and TORQUE values
    • 8 programs to control the tightening process
    • 1 programmable sequence up to a max of 8 steps
    • 8 + 8 programmable I/O (21 + 22 signal types)
    • PRE-AUTO UNTIGHTENING: to set the untightening angle and the pause between the untightening and the subsequent tightening (application in the electrical / electronic field, for example when it is necessary to open and then close connectors to insert electrical wires)
    • POST-AUTO UNTIGHTENING: the untightening angle is settable as well as the time pause of left rotation start after the tightening end
    • STOP-BY-TIME TIGHTENING: to tighten in depth and not to define torque

    ADDITIONAL TIGHTENING STRATEGIES

    • Torque control with tightening angle monitoring
    • Torque control with time and tightening angle monitoring
    • Angle control and torque monitoring
    • Time control and torque monitoring (Stop-by-time tightening)

     

FEATURES

  • Led
  • Connecting cable supplied
  • Quick change chuck
  • ESD certification
  • EXTENDED WARRANTY: 2 years or 1 million cycles

APPLICATIONS

Industrial production environments where great production flexibility is required: the system adapts to the variability of production batches and therefore to the different types of screws to be used.

Ideal for automotive and household appliance industries, where tightening has to be done in tight and hard-to-reach spaces- for instance, up against walls, near to frame members and profiles.

Технические данные

PDF
Модель
E8CC2A90-2000
Артикул
111712130
Крутящий момент (Lb)
2.6÷17.7
Крутящий момент (Nm)
0.3÷2
Диапазон скоростей холостого хода (rpm)
300÷2000
Вес (Lb)
1.68
Вес (Kg)
0.76
Вспомогательные аксессуары
MALE SQUARE DRIVE 1/4"
Длина кабеля (m)
3
Контроллер и податчик винтов
TPU-C1/TPU-C3
Напряжение питания (Vac)
100 - 240
Обратный ход
Reversible
Рабочее напряжение (Vdc)
32
Размеры (mm)
Ø 39 x L 327
Тип запуска
Lever start
Тип рукоятки
ANGLE AT 90°
технологии завинчивания
Torque/angle current control

Dotazione di servizio

  • Руководство по эксплуатации и техническому обслуживанию
  • Imballo riciclabile

Связаться с нами

Вы хотите узнать больше о технологиях закручивания? Хотите ли вы получить предложение или конкретные ответы от наших дистрибьюторов или инженеров Фиам?

Fiam ti offre eccellenti soluzioni su misura.

Я хочу получать эти услуги:

Я хотел бы получать информацию по этим темам:

Пожалуйста, пришлите мне следующие публикации в формате PDF:

Thank you for filling the form. The requested information has been sent correctly and you will be contacted as soon as possible.

Please double check the fields