40A17AF16B-HEX.16
Артикул 114807179
40A17AF16B-HEX.16
Артикул 114807179
ANGLE AIR NUTRUNNER WITH IN LINE TUBE NUT OPEN HEAD
The open-end flat-head air wrench is the most effective solution for getting to tightening points that a standard angle air screwdriver cannot reach. Designed and built to be use on pressurized circuits, namely components that have lines carrying fluid fastened with relevant lock nuts that need tightening: gas trains for hobs, pipes for refrigerator compressors, motor vehicle braking systems, coffee machines, boiler plumbing.
Open-end flat-head air wrench guarantees accurate tightenings and, thanks to the torque control system, ensures a very high torque repeatability while maintaining same torque values in hard and soft joints for hundreds of thousands of cycles.
Special heads suit a whole host of different assembly situations: their radial opening actually means the hose can be run through the hex socket, thus making it easy to reach the nut. These robust heads and offsets, uniques on the market, can be supplied with end gears of different shapes and dimensions.
The start lever operates both the tightening and the realignment of the end gear: a great advantage in terms of speed and productivity.
FEATURES
- In line tube nut open head
- With blind end gear: the hexagonal end gear has a “ridge” on which the nut to be tightened sits, facilitating tightening
- For 16 mm hexagons
- Max. tube Ø that the head can accommodate: 9 mm. Different diameters on request
- Lever start with long, ergonomic lever
- Realignment of the end gear with lever start
- Cycle end acoustic signal
- Safe, practical and accurate clutch adjustment system with key supplied, thanks to the rotating cursor
DIMENSIONS


UPON REQUEST
- With end extended gear
- With end gear with different geometries

Технические данные
PDFDotazione di servizio
- Руководство по эксплуатации и техническому обслуживанию
- Imballo riciclabile





