CA-E8MCC P-AA …

Артикул Upon request

CA-E8MCC P-AA …

Артикул Upon request

PISTOL AUTOMATIC ELECTRIC SCREWDRIVER WITH TORQUE/ANGLE CURRENT CONTROL AND SCREW FEEDING — FORWARD BIT STROKE

To work with precision, reliability and great ergonomics. Designed and built entirely by Fiam in Italy.

  • Eliminates the manual steps of screw pick and place on the bit/piece
  • Ensures the continuous supply of screws which are «shot» automatically
  • Reduces tightening times (–35%)
  • Interconnects with the factory system (INDUSTRY 4.0)
  • Ensures less operator fatigue
  • Short Pay Back: 98 days on a production of 2.000 pieces per day​
  • Turnkey system​
  • Guaranteed operation: strict internal pre-delivery tests​

TIGHTENING DEVICE WITH FORWARD BIT STROKE — PATENTED

  • Reduces operator fatigue
  • Keeps the screw tip always visible and does not allow it to move back
  • During tightening, the screwdriver head does not rest on the surfaces, protecting them from any contact

ELECTRIC TECHNOLOGY

eTensil brushless nutrunner motor with torque/angle current control: allow assemblies with different parameters of torque, speed, etc.: the same tightening system can tighten the same screw on different joints simply by adapting the programs on the coupled unit.

To match with TPU — C1 or TPU — C3 control unit that allow controls, monitoring, analysis, diagnostics e real-time scheduling of production process and eliminate post-process controls.To chose from the related tables below.

eTensil screwdrivers and control units, are covered by an extended warranty of 24 months or 1.000.000 cycles (first goal achieved).


4 TYPES OF COMBINABLE SCREW FEEDERS

  • ED B: Ø Bowl 240 mm, for screws L (mm) 10÷35
  • ED B 1|1: Ø Bowl 240 mm, for screws L (mm) 10÷35, with increased FRL group
  • ED B M 1|1: Ø Bowl 420 mm, for screws L (mm) 35÷60, for large screws and greater working autonomy
  • ED B 2|1: 2 Ø Bowls240 mm, for screws L (mm) 10÷35, to feed 2 types of screws with 1 screwdriver
  • ED S — Silent Feeder: segment conveyor, for screws L max (mm) 25 — Tank with 2 litres capacity
  • MECHANICAL FEATURES OF SCREW FEEDERS

    • Over-load sensor: to ensure keeping the correct quantity of screws on linear rail
    • Screws selector: allows production increase for the “screw shot” inside a closed chamber
    • Pneumo-electric device: equipped with Festo components
    • Low level sensor: indicates when the bowl needs screw reloading
    • Analogic line pressure switch: controls the incoming air pressure for the correct operation of different screw feeder functions and of the pneumatic tightening devices
    • Structure in stainless steel: with transparent cover and lateral panels that can be dismantled for maintenance activity
    • Filter, pressure regulator and lubricator with gauge already integrated in the machine
    • Tube carring hoses and cables: 5 m

    ED S — Silent Feeder model: with screw feeding system via segment conveyor that loads, aligns and sends the screws to an inclined rail

  • INTERCONNECTIVITY FOR INDUSTRY 4.0

      • Integrated PLC to set and manage the tightening cycle basing on the specific application using the functional external keypad (PLC -portable and remotely manageable, for the ED S model)

      • It connects to the several devices on the production line: conveyor belt, barcode readers, workpiece clamping jig, signalling and monitoring mechanisms such as LEDs, part counters, light towers.etc.

      • EDMI (EasyDriver Machine Interface) is a Web Server interface integrated into the screw feeder. It allows remote connection to the tightening unit via PC, smartphone or tablet. It allows:
          • to conveniently access the main PLC functions of the machine, without having to interact manually
            on system’s PLC display when placed in an inaccessible position

          • to check the operating status and any anomaly of the system in real time and facilitate
            troubleshooting in case of errors

          • to monitor the machine in action and its main functions and facilitate understanding of the
            behavior of the machine

          • to have real-time statistics regarding operation of the system to be able to analyze them in
            order to maximize machine performance

          • to set the main machine parameters remotely instead of by machine side.

          • the interface is provided in English language with dynamic flowcharts and easy-to-understand graphs.

      • Diagnostic messages: diagnostics, suggestions as to possible main causes of inefficiency, real-time monitoring of the signal generating the issue, colour display to mirror machine status

      • Modbus serial communication protocol via ethernet RJ45 relating to the Factory system

      • Testing mode: allows the machine to perform free running tightening cycles for setting, installing and monitoring the machine

      • Data log: at each tightening cycle or in case of anomaly, the main tightening data are stored and can be easily copied from the SD memory card present in the PLC to a PC


SCREW-RETAINING HEADS

  • Always customized on the screw and the component to reach any depth
  • Reduced dimensions, also made with special materials/supports to avoid damaging the components, screw tip always clearly visible
  • Excellent screw hold with mechanical retention and not by suction (no jamming in case of dust)

APPLICATIONS

For large series of identical screws – High production rates in any production sector. The ergonomic pistol grip is ideal for tightening points on vertical planes.

Технические данные

PDF
Модель
CA-E8MCC P-AA …
Артикул
Upon request
Крутящий момент (Lb)
2.6÷88.5
Крутящий момент (Nm)
0.3÷10
Диапазон скоростей холостого хода (rpm)
30 ÷ 2000
Завинчивающие устройства
Forward bit stroke
Контроллер и податчик винтов
TPU-C1/TPU-C3
Обратный ход
Non-reversible
Тип запуска
Push button
Тип рукоятки
FORWARD PISTOL
Тип трактора
Electric
технологии завинчивания
Torque/angle current control

Dotazione di servizio

  • Руководство по эксплуатации и техническому обслуживанию
  • Imballo riciclabile

Связаться с нами

Вы хотите узнать больше о технологиях закручивания? Хотите ли вы получить предложение или конкретные ответы от наших дистрибьюторов или инженеров Фиам?

Fiam ti offre eccellenti soluzioni su misura.

Я хочу получать эти услуги:

Я хотел бы получать информацию по этим темам:

Пожалуйста, пришлите мне следующие публикации в формате PDF:

Thank you for filling the form. The requested information has been sent correctly and you will be contacted as soon as possible.

Please double check the fields