CA-E8MCC D-AA …
Артикул Upon request
CA-E8MCC D-AA …
Артикул Upon request
STRAIGHT AUTOMATIC ELECTRIC SCREWDRIVER WITH TORQUE/ANGLE CURRENT CONTROL AND SCREW FEEDING — FORWARD BIT STROKE
To work with precision, reliability and great ergonomics. Designed and built entirely by Fiam in Italy.
- Eliminates the manual steps of screw pick and place on the bit/piece
- Ensures the continuous supply of screws which are «shot» automatically
- Reduces tightening times (–35%)
- Interconnects with the factory system (INDUSTRY 4.0)
- Ensures less operator fatigue
- Short Pay Back: 98 days on a production of 2.000 pieces per day
- Turnkey system
- Guaranteed operation: strict internal pre-delivery tests
TIGHTENING DEVICE WITH FORWARD BIT STROKE — PATENTED
- Reduces operator fatigue
- Keeps the screw tip always visible and does not allow it to move back
- Pendant la phase de vissage, la tête de la visseuse n’e repose’appuye pas sur les surfaces des composants, les protégeant de tout contact
- During tightening, the screwdriver head does not rest on the surfaces, protecting them from any contact
ELECTRIC TECHNOLOGY
eTensil brushless nutrunner motor with torque/angle current control: allow assemblies with different parameters of torque, speed, etc.: the same tightening system can tighten the same screw on different joints simply by adapting the programs on the coupled unit.
To match with TPU — C1 or TPU -C3 control unit that allow controls, monitoring, analysis, diagnostics e real-time scheduling of production process and eliminate post-process controls.To chose from the related tables below.
eTensil screwdrivers and control units, are covered by an extended warranty of 24 months or 1.000.000 cycles (first goal achieved).
4 TYPES OF COMBINABLE SCREW FEEDERS
- ED B: Ø Bowl 240 mm, for screws L (mm) 10÷35
- ED B 1|1: Ø Bowl 240 mm, for screws L (mm) 10÷35, with increased FRL group
- ED B M 1|1: Ø Bowl 420 mm, for screws L (mm) 35÷60, for large screws and greater working autonomy
- ED B 2|1: 2 Ø Bowls240 mm, for screws L (mm) 10÷35, to feed 2 types of screws with 1 screwdriver
- ED S — Silent Feeder: segment conveyor, for screws L max (mm) 25 — Tank with 2 litres capacity
-
MECHANICAL FEATURES OF SCREW FEEDERS
- Over-load sensor: to ensure keeping the correct quantity of screws on linear rail
- Screws selector: allows production increase for the “screw shot” inside a closed chamber
- Pneumo-electric device: equipped with Festo components
- Low level sensor: indicates when the bowl needs screw reloading
- Analogic line pressure switch: controls the incoming air pressure for the correct operation of different screw feeder functions and of the pneumatic tightening devices
- Structure in stainless steel: with transparent cover and lateral panels that can be dismantled for maintenance activity
- Filter, pressure regulator and lubricator with gauge already integrated in the machine
- Tube carring hoses and cables: 5 m
ED S — Silent Feeder model: with screw feeding system via segment conveyor that loads, aligns and sends the screws to an inclined rail
-
INTERCONNECTIVITY FOR INDUSTRY 4.0
-
- Integrated PLC to set and manage the tightening cycle basing on the specific application using the functional external keypad (PLC -portable and remotely manageable, for the ED S model)
-
- It connects to the several devices on the production line: conveyor belt, barcode readers, workpiece clamping jig, signalling and monitoring mechanisms such as LEDs, part counters, light towers.etc.
-
- EDMI (EasyDriver Machine Interface) is a Web Server interface integrated into the screw feeder. It allows remote connection to the tightening unit via PC, smartphone or tablet. It allows:
-
- to conveniently access the main PLC functions of the machine, without having to interact manually
on system’s PLC display when placed in an inaccessible position
- to conveniently access the main PLC functions of the machine, without having to interact manually
-
- to check the operating status and any anomaly of the system in real time and facilitate
troubleshooting in case of errors
- to check the operating status and any anomaly of the system in real time and facilitate
-
- to monitor the machine in action and its main functions and facilitate understanding of the
behavior of the machine
- to monitor the machine in action and its main functions and facilitate understanding of the
-
- to have real-time statistics regarding operation of the system to be able to analyze them in
order to maximize machine performance
- to have real-time statistics regarding operation of the system to be able to analyze them in
-
- to set the main machine parameters remotely instead of by machine side.
-
- the interface is provided in English language with dynamic flowcharts and easy-to-understand graphs.
-
- EDMI (EasyDriver Machine Interface) is a Web Server interface integrated into the screw feeder. It allows remote connection to the tightening unit via PC, smartphone or tablet. It allows:
-
- Diagnostic messages: diagnostics, suggestions as to possible main causes of inefficiency, real-time monitoring of the signal generating the issue, colour display to mirror machine status
-
- Modbus serial communication protocol via ethernet RJ45 relating to the Factory system
-
- Testing mode: allows the machine to perform free running tightening cycles for setting, installing and monitoring the machine
-
- Data log: at each tightening cycle or in case of anomaly, the main tightening data are stored and can be easily copied from the SD memory card present in the PLC to a PC
-
SCREW-RETAINING HEADS
- Always customized on the screw and the component to reach any depth
- Reduced dimensions, also made with special materials/supports to avoid damaging the components, screw tip always clearly visible
- Excellent screw hold with mechanical retention and not by suction (no jamming in case of dust)
APPLICATIONS
For large series of identical screws – High production rates in any production sector. The ergonomic straight grip is ideal for tightening points on horizontal planes.
To improve the operating layout and reduce physical fatigue, all straight CA automatic screwdrivers are supplied with a clamping collar included, allowing installation of the tool on a Fiam reaction arm, type BC or BCA, on the upper side for better visibility of the tightening point and an optimal operator hand-arm position.
The collar is supplied to match the motor diameter (for Ø 32 code 692039246, for Ø 36 code 692039247, for Ø 42.5 code 692039263).

Технические данные
PDFDotazione di servizio
- Руководство по эксплуатации и техническому обслуживанию
- Imballo riciclabile





