Quote request for nut presenter

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

All starred fields are required ( ).

Contact details

Project

Type of use

Please note: applications only with FIAM tools
  • - For manual systems, we supply: power supply unit, special Fiam key, key-guide.
  • - For automatic systems, we supply: power supply unit, special Fiam key, compensator unit.

Processes and tools currently in use

If you wish add some files showing the tightening systems and tools currently in use (pictures, videos or technical drawings (max 10 files - 50Mb each - Check the supported file types.

Drag files here or click to upload

If your files are very heavy, you can send them us via WeTransfer, Google Drive or DropBox, using this mail as the address of destination: orders@fiamgroup.com and specifying your name and family name

Nut features

Help us identifying all the nuts features.

It is necessary to add at least one nut to continue.
Nut {{index+1}}

Are you sure?

Nut type

Dimensions (mm)

Dimensions (mm)

Dimensions (mm)

Drag files here or click to upload

If your files are very heavy, you can send them us via WeTransfer, Google Drive or DropBox, using this mail as the address of destination: orders@fiamgroup.com and specifying your name and family name

Thread size

Material

Finish

Tightening type

(Write "0" if the value is unknown)

(Write "0" if the value is unknown)

Workpiece feature

Help us identifying all the workpieces features.

Please add a component in order to proceed.
Workpiece {{index+1}}

Are you sure?

Tightening point

In case of several screws in different positions, just mention the most common: you can add the drawings at the following stage 6.

Dimensions (mm)

Dimensions (mm)

Lunghezza totale del prigioniero (mm)

Workpiece material

Tightening cycle

Please note: Approximate total cycle time of at least 5 seconds per nut (consider: manipulator speed, distance of the point to be tightened, pin length, screwdriver speed, etc...)

Enter the quantity for each nut used in this component:

Nut {{index + 1}} - []

    • Nut files uploaded: {{ nut.files }}
    • I will upload some file using the sharing platform: Yes
    • Nut type: {{ $t("nut_t.type['" + lwrc(nut.type) + "']") }}
    • Dimensions (mm):  {{ nut_dimensions(index) }}
  • Thread size: {{ nut.thread_size }}
  • Material: {{ nut.material_other }}
  • Material: {{ $t("nut_t.material['" + lwrc(nut.material) + "']") }}
  • Finish: {{ nut.finish_other }}
  • Finish: {{ $t("nut_t.finish['" + lwrc(nut.finish) + "']") }}
  • Torque: Torque (Nm): {{ nut.tightening_torque_nm }} , Accuracy (%): {{ nut.tightening_torque_precision }} , Speed (Rpm): {{ nut.tightening_torque_speed }}
  • Depth: Accuracy (%): {{ nut.tightening_depth_precision }} , Speed (Rpm): {{ nut.tightening_depth_speed }}

(Write "0" if not present)

Samples: nuts and workpieces

Remark, in case of order: we will need 500 nuts and 5 workpieces, one assembled, and with the tightening points marked for the test and commissioning.The max dimensions for the samples package are: mm 800x1200x1000 (h), maximum weight <50kg.

Nuts samples are available and will be sent to Fiam.
If samples are not submitted, Fiam will only be able to draw up an indicative offer with the data stated in the data entry form.

Workpiece samples are available and will be sent to Fiam.
If samples are not submitted, Fiam will only be able to draw up an indicative offer with the data stated in the data entry form.

Nuts drawings are available and will be sent to Fiam.
If drawings are not available, dimensional tolerances stated in Fiam quotation will be valid.

Please upload the drawings.

Allega il disegno dei dadi (formati: .pdf, .dxf, .jpeg, .png, .tif, .stp - max 50Mb). Ricorda di segnalarci anche le tolleranze costruttive ed eventuali trattamenti/finiture.

Drag files here or click to upload

If your files are very heavy, you can send them us via WeTransfer, Google Drive or DropBox, using this mail as the address of destination: orders@fiamgroup.com and specifying your name and family name

3D and/or workpiece drawings are available and will be sent to Fiam.

Please upload the drawings.

Allega il disegno e/o il 3D del componente (formati: .pdf, .dxf, .step, .igs, .x_t, .x_s, .dwg, .jpg, .png - max 50Mb). Ricorda di segnalarci anche le tolleranze costruttive ed eventuali trattamenti/finiture.

Drag files here or click to upload

If your files are very heavy, you can send them us via WeTransfer, Google Drive or DropBox, using this mail as the address of destination: orders@fiamgroup.com and specifying your name and family name

By selecting this field, the supplied samples will be returned along with the unit. However we will hold 1 sample set and some nuts in order to follow up quickly with the after sales and orders repetition.

If you want to protect your know-how, ask us the Not Disclosure Agreement.

Further specifications

Tightening system

Tightening axis (more than one type can be selected)

Tipo di avvitatura

Ergonomic devices

Nut presenter features

Standard features of the nut presenter are:

  • Power supply: 230V/50Hz
  • Air consumption: AM nut presenter= <<1l/min ; N ED nut presenters= normally not expected
  • Input dynamic air pressure: MAX 7 bar – MIN 5.5 bar

Please specify any further needs:

Other optional information

Budget

Competitors

Let us know which competitor you're considering, any further detail help us to give you our best solution either technical and economic.

Request a quotation for an auto feed tightening system

Summary

Following a summary of what you have selected. If you wish to make some changes, you can step back using the buttons above or at the bottom of this page .

Contact person details

  • Name: {{ form.contact.name }}
  • Company Name: {{ form.contact.company }}
  • VAT number: {{ form.contact.vat_number }}
  • Email: {{ form.contact.email }}
  • City: {{ form.contact.city }}
  • Post code: {{ form.contact.zip }}
  • Country: {{ form.contact.country }}
  • Telephone: {{ form.contact.phone }}
  • Position: {{ form.contact.function }}

Compiler details

  • Name: {{ form.compiler.name }}
  • Company Name: {{ form.compiler.company }}
  • Email: {{ form.compiler.email }}
  • City: {{ form.compiler.city }}
  • Post code: {{ form.compiler.zip }}
  • Country: {{ form.compiler.country }}
  • Telephone: {{ form.compiler.phone }}
  • Position: {{ form.compiler.function }}

Project

  • Description:

    {{ form.project.description }}

  • Name: {{ form.project.name }}
  • Required delivery time: {{ form.project.deadline }}
  • Quantity: {{ form.project.qty }}
  • Type of use: {{ $t("project_t.usage['" + lwrc(form.project.usage) + "']") }}

Processes and tools currently in use

  • Description: {{ form.current_tools.description }}
  • File uploaded: {{ form.current_tools.files }}
  • I will upload some file using the sharing platform: Yes

Nuts features

Nut {{index + 1}}
    • Nut files uploaded: {{ nut.files }}
    • I will upload some file using the sharing platform: Yes
    • Tipo dado: {{ $t("nut_t.type['" + lwrc(nut.type) + "']") }}
    • Dimensions (mm):  {{ nut_dimensions(index) }}
  • Thread size: {{ nut.thread_size }}
  • Material: {{ nut.material_other }}
  • Material: {{ $t("nut_t.material['" + lwrc(nut.material) + "']") }}
  • Finish: {{ nut.finish_other }}
  • Finish: {{ $t("nut_t.finish['" + lwrc(nut.finish) + "']") }}
  • Torque (Tightening type): Torque (Nm): {{ nut.tightening_torque_nm }} , Accuracy (%): {{ nut.tightening_torque_precision }} , Speed (Rpm): {{ nut.tightening_torque_speed }}
  • Depth (Tightening type): Accuracy (%): {{ nut.tightening_depth_precision }} , Speed (Rpm): {{ nut.tightening_depth_speed }}

Workpieces

Workpiece {{index + 1}}
  • Type: {{ $t("component_t.type['" + lwrc(component.type) + "']") }}
  • Dimensions (mm):  {{ component_point_dimensions(index) }}
  • Workpiece material: {{ component.material_other }}
  • Workpiece material: {{ $t("component_t.material['" + lwrc(component.material) + "']") }}
  • Particular solution in order not to damage the workpiece:

    {{ component.warnings }}

  • N.of workpieces per hour: {{ component.components_per_hour }}
  • Total cycle time for the workstation (seconds): {{ component.total_cycle_time }}
  • Tightening cycle time from start to 'system ready for the next cycle' (seconds): {{ component.tightening_time }}
  • Operating autonomy without screws filling (hours): {{ component.autonomy }}
Number of nuts:
  • Nut {{ index + 1 }}: {{ nut.qty }}

Samples

  • I will send nuts (nr. pieces): {{ form.sample.nuts }}
  • I will send workpieces (no.pieces): {{ form.sample.components }}
  • Return nuts/workpiece samples: Yes
  • NDA Required: Yes
  • Disegni dadi caricati: {{ form.sample.nuts_files }}
  • Workpiece drawings uploaded: {{ form.sample.components_files }}
  • Spedirò i disegni delle dadi attraverso piattaforma di condivisione: Yes
  • I will upload workpiece drawings using the sharing platform: Yes

Further specifications

  • System type: {{ system_type_list(true) }}
  • Tightening axis: {{ system_axis_list(true) }}
  • Tightening axis (degrees): {{ form.system.axis_angle }}
  • Tipo di avvitatura: Left tightening
  • Ergonomic devices: {{ system_aux_list(true) }}

Nut presenter features

  • Voltage and frequency different from the standard: {{ form.needs.tension }}

Other optional information

  • Budget: {{ form.budget }}
  • Competitor 1: {{ form.competitors.competitor1.name }}
    Current supplier: YesNo
  • Competitor 2: {{ form.competitors.competitor2.name }}
    Current supplier: YesNo
  • Competitor 3: {{ form.competitors.competitor3.name }}
    Current supplier: YesNo
  • Competitor 4: {{ form.competitors.competitor4.name }}
    Current supplier: YesNo
  • Further requests or details:

    {{ form.notes }}

Thank you for filling the form. The requested quotation has been sent correctly and you will be contacted as soon as possible. In the meantime, you will immediately receive an email containing the pdf of the data entered.

If in the form you have chosen to send us files through the sharing platforms, please use this email: orders@fiamgroup.com, specifying name, surname and company name.