AUTOMATIC SCREW PRESENTER – MANUAL AND AUTOMATIC USE

NJR screw presenters are very versatile because the screw suction system with which the coupled tools must be equipped means they can be used in a multitude of manual and automatic applications.

• For screws made of any material, even non-magnetisable with lengths up to 18 mm
• For all recess types
• For screwdrivers with screw suction systems
• For nutrunner motors with screw suction systems and that are installed on slides or robots

• They can be used with any screw type, including those with Torx or hexagonal recesses: the screw suction system can pick up effectively, eliminating the bit/screw head coupling problems that are common with these screw types.
• Convenient pick-up point: once it has been selected by the rail, the screw is moved to the pick-up point (1), where the suction head is located. The pick-up point has a screw detection sensor (2) with a signal output cable. The built-in cable provides a signal (on/off) that indicates if there is a screw in the pick-up area.
• Operating time setting: the convenient built-in timer sets the screw presenter operating time. The screw presenter stops after a certain time has lapsed while a screw is being held in the pick-up point. This time is
  set via a timer.

FEATURES

• For screws with shank Ø 2 mm
• Supplied with a linear rail already installed and calibrated by Fiam, so it can be used immediately in production lines
• Configurable with linear rails:
  • RR20 (shank Ø 2 mm)
  • RR23 (shank Ø 2,3 mm)
  • RR26 (shank Ø 2,6 mm)
  • RR30 (shank Ø 3 mm)
• Bit magnetiser
• It also operates at 120V with the adapter provided.
• High-capacity screw bowl: 150 cc

APPLICATIONS

• They are versatile in use because they can be used with different screws: the rails are quick and easy to install/ replace, and are interchangeable for use with screws of different shank diameters (shank diameters from 2 to 5 mm and maximum shank length of 18 mm)
• The pick&place place systems for manual and automatic use consist of NJR screw presenters to ensure fast, smooth work cycles, helping to reduce production costs contributing concretely to the reduction of production costs since they allow a significant reduction in cycle times.